All chapters

Ways to make the units

A quilt's units can be cut and sewn in many ways, and most quilters have their own. Here is what QuiltCrafter works out, which other methods there are, and where they are well explained.

The links go to other people's pages. They were chosen because they explain well; we have no deal with them. If you use another method or a special ruler, follow the sizes in its instructions.

Before you sew

6½" · 16.5 cm

Test your seam first

Cut six strips 1½" × 3" and sew them together along their long sides. Press and measure: the piece should be 6½" wide, with 1" between the seams.

Cut six strips 4 × 8 cm and sew them together along their long sides with a 0.75 cm seam. Press and measure: the piece should be 16.5 cm wide, with 2.5 cm between the seams.

If it is narrower, the seam is too wide and the blocks come out too small; if it is wider, the seam is too narrow. Put it right before you sew the units.

When the seam is off

  • Move the needle one step to the right if the seam is too wide, and to the left if it is too narrow.
  • Use a quarter-inch foot with a guide or a seam guide, so the fabric always follows the same line.
  • Finer thread (50 wt) takes up less room in the seam.
  • Press each seam before another crosses it, and open where many seams meet.
  • Some patterns ask for a "scant" quarter inch: a thread narrower than ¼".

Triangles

Half-square triangle (HST)

In QuiltCrafter: Two at a time, eight at a time, or cut larger and trimmed. You choose under "How to sew the units" on the cutting chart.

Other methods: Four at a time, where two squares are sewn all the way round and cut on both diagonals, strips sewn together and cut into triangles, and triangle paper.

Quarter-square triangle (QST)

In QuiltCrafter: Straight from one square cut twice on the diagonal, or from two HSTs laid together, sewn, cut again and trimmed.

Other methods: Four alike at a time from two large HSTs, and special rulers for cutting the triangles.

Half-quarter-square triangle

In QuiltCrafter: Loose triangles, or from an HST and a plain square, sewn and cut into two units, one mirrored, and trimmed. You choose on the cutting chart.

Other methods: Special rulers that cut the triangles straight.

Half-rectangle triangle (HRT)

In QuiltCrafter: A rectangle the piece's shape cut on the diagonal, sewn offset so the seam runs corner to corner, and trimmed.

Other methods: Two rectangles right sides together, sewn and cut two at a time, and HRT rulers. They do not trim like HSTs, as the angle is not 45°.

Geese and square in a square

Flying geese

In QuiltCrafter: Four at a time, either exact and without waste or a little larger and trimmed, or stitch and flip with two small squares on a rectangle. You choose on the cutting chart.

Other methods: The old way from one large and two small triangles, and rulers for trimming geese.

Square in a square

In QuiltCrafter: Triangles cut a little larger and trimmed so the middle sits straight, or stitch and flip with four small squares on a large one. You choose on the cutting chart.

Other methods: Triangles cut to the exact size, and paper piecing.

Stitch and flip

Snowball and stitch-and-flip corners

In QuiltCrafter: Stitch and flip: small squares are sewn on the corners along the diagonal, the seam is trimmed, and the corner folded back. With a bonus HST, a second seam is sewn outside the first, so the cut-off corner becomes a small HST.

Other methods: Cut the corners off and sew triangles on instead, so nothing is cut away.

Strips and squares

Strip sets

In QuiltCrafter: Squares and rectangles are cut from strips across the fabric, and a Lone Star is sewn from strip sets cut at 45°.

Other methods: Strips are sewn together and cut across into rows of squares: quick for four-patches, nine-patches, Irish Chain and Rail Fence.

Curves

Drunkard’s Path and other curves

In QuiltCrafter: Full-size templates with seam allowance and notches where the curves meet.

Other methods: Templates a little too large, so the unit is trimmed after sewing, and curve rulers.